Virtual Reality

Acrylic Case For Raspberry Pi Pico — Dule-Sided Protection
Customized Key Cap, Comfortable And Handy Touch, Dust-Proof
Elevated Top Panel, Keeping Enough Space For Pinheaders And USB Port Reversed Notch For SWD Debugging Pins
With Acrylic Case Installed, The Pico Still Can Be Attached To Expander Or Breadboard

Features

The Pico-SIM868-GSM/GPRS/GNSS is a GSM, GPRS, GNSS, and Bluetooth module designed for Raspberry Pi Pico. This small size and low power module
will easily enable your Raspberry Pi Pico multiple functions including making phone call, sending SMS, 2G communication, global positioning, as well as
Bluetooth transmission.

Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards
UART communication, serial AT commands control
Supports SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc.
Bluetooth3.0 support, allows Bluetooth data transfer
RTC real time clock, with rechargeable Li-po battery
Integrates 3.7V Li-po battery connector and recharge circuit, allows being powered from external rechargeable Li-po battery, or recharging it in turn
Onboard microphone, together with speaker header, can be used to make phone call
2x LED indicators, for monitoring the module operating status
Onboard nano SIM card slot, supports 2G/4G SIM card
Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)


Part List

1. Pico-SIM868-GSM/GPRS/GNSS x1
2. LTE antenna x1
3. GPS antenna x1
4. Bluetooth antenna x1
5. 20PIN female pin header x2
6. 40PIN male pin header × 1
7. 3.7V rechargeable Li-po battery x1
8. Speaker x1


Resources download: https://www.waveshare.com/wiki/Pico-SIM868-GSM/GPRS/GNSS
Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards; Onboard nano SIM card slot, supports 2G/4G SIM card
UART communication, serial AT commands control; Supports SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc.
Bluetooth3.0 support, allows Bluetooth data transfer; RTC real time clock, with rechargeable Li-po battery
Integrates 3.7V Li-po battery connector and recharge circuit, allows being powered from external rechargeable Li-po battery, or recharging it in turn
Onboard microphone, together with speaker header, can be used to make phone call; 2x LED indicators, for monitoring the module operating status

Features
Clear Acrylic Protection Case For Raspberry Pi Pico
1.Acrylic Case Compatible with Raspberry Pi Pico
— Dule-Sided Protection —Clear acrylic panels, with customized key cap, neat design

2.Key Cap For Easy Use
Customized Key Cap, Comfortable And Handy Touch, Dust-Proof

3.Pinheaders/Connectors Still Accessible
Elevated Top Panel, Keeping Enough Space For Pinheaders And USB Port
Reversed Notch For SWD Debugging Pins

4.Compatible With Expander/Breadboard
With Acrylic Case Installed, The Pico Still Can Be Attached To Expander Or Breadboard

Note
The Raspberry Pi Pico Board is not included in the product package .
【Acrylic Case For Raspberry Pi Pico】Clear acrylic panels, with customized key cap, neat design
【Pinheaders/Connectors Still Accessible】Elevated Top Panel, Keeping Enough Space For Pinheaders And USB Port ,Reversed Notch For SWD Debugging Pins
【Compatible With Expander/Breadboard】With Acrylic Case Installed, The Pico Still Can Be Attached To Expander Or Breadboard
【Key Cap For Easy Use】Customized Key Cap, Comfortable And Handy Touch, Dust-Proof
【Packing List】Acrylic top panel and bottom panel x1,Key cap x1,Screws and standoffs pack x1,Screwdriver x1

Pico Wi-Fi HAT is a compact and easy-to-use Wi-Fi HAT for the Raspberry Pi Pico that includes an ESP8266 module, IEEE 802.11b/g/n Wi-Fi Standard, 3.3 V Operating Voltage, UART Communication interface, and a 40-pin GPIO extension header that can be controlled via AT Command and supports TCP/UDP communication protocol.

Pico Wi-Fi HAT also includes a 1.14-inch display with a resolution of 240 x 135 pixels, 65K RGB colors, and a sharp and vivid exhibiting effect, designed primarily for user engagement via SPI connection by incorporating a GPIO header. The 1.14-inch LCD includes the ST7789 Driver and SPI Interface, decreasing the amount of IO pins required.

It's a simple way to enable Wi-Fi on the Raspberry Pi Pico, making it suitable for a variety of IoT communication projects. It is intended for developers of all skill levels, from the most experienced to those who are just getting started with IoT devices.

Features

Specifications

Applications

Kit Content

Note: Raspberry Pi Pico is not included!

Compact TV tuner that turns your Samsung Galaxy Tab2 or Note 10.1 into a mobile TV, connects directly to the 30-pin dock port and requires no own power source. Android 4.0 or later, Frz./span./ital. Packaging:
Is discontinued by manufacturer ‏ : ‎ No
Product Dimensions ‏ : ‎ 20 x 10.5 x 2.5 cm; 60 Grams
Date First Available ‏ : ‎ 20 Nov. 2012
Manufacturer ‏ : ‎ iCube
ASIN ‏ : ‎ B00A9QW5EY
Item model number ‏ : ‎ Tivizen PICO Galaxy
Guaranteed software updates until ‏ : ‎ unknown

DVB-T Tuner with 30 Pin Dock Connector - Compatible with Samsung Galaxy Note 10, Galaxy Tab 7 - 10 Inch Galaxy Tab Wi-Fi, Galaxy Tab , Works from ICS (Android OS 4.0) and above