Price: £12.69
Last Updated: Dec 27, 2023 17:24:22 UTC
Overview
Raspberry Pi Pico is a low-cost, high-performance microcontroller board with flexible digital
interfaces. It incorporates Raspberry Pi’s own 2040 microcontroller chip, with dual-core Arm
Cortex M0+ processor running up to 133 MHz, embedded 264KB of SRAM and 2MB of on-board
Flash memory, as well as 26x multi-function GPIO pins.
For software development, either Raspberry Pi’s C/C++ SDK, or the MicroPython is available.
There’re also complete development resources and tutorials to help you get started easily, and
integrate it into end products quickly.
Features
Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz
264KB of SRAM, and 2MB of on-board Flash memory
Castellated module allows soldering direct to carrier boards
USB 1.1 Host and Device support
Low-power sleep and dormant modes
Comprehensive C/C++/Micropython SDK, software examples, and documentation
Drag & drop programming using mass storage over USB
26 × multi-function GPIO pins
2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
Accurate clock and timer on-chip
Temperature sensor
Accelerated floating-point libraries on-chip
8 × Programmable I/O (PIO) state machines for custom peripheral support
PACKAGE CONTENT
2x Raspberry Pi Pico
【Low-Cost&High-Performance】Raspberry Pi Pico incorporates Raspberry Pi’s own 2040 microcontroller chip, with dual-core Arm Cortex M0+ processor running up to 133 MHz, embedded 264KB of SRAM and 2MB of on-board Flash memory
【Multiple Software Support】Pico has rich and complete software support, it comes with a complete Rasberry Pi official C/C++ SDK, Micropython SDK.
【Rich Hardware Interface】Raspberry Pi Pico has 26 × multi-function GPIO pins, 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels.
【Custom Peripheral Support】8 × Programmable I/O (PIO) state machines for custom peripheral support
【Build Project in Tiny Size】Only 2.1cm*5.1cm ( as small as your thumb). Pico has been designed to use either soldered 0.1″ pin-headers or can be used as a surface-mountable ‘module’.