Virtual Reality

Gas Circulation Fan 3 Speeds Heat Dissipation Prevent Fogging Soft Pad Cooling Fan for Quest 2 VR. VR fan sucks the heat outside to accelerate gas circulation so get your face cooler and less sweat, and stop the lens and glasses from fogging, provides you with better gaming immersion.

Product button operation: the button control fan is to press high, medium, low, off 4 rotation switch; Each time the fan gear is changed, the LED will first display the current gas volume gear, and then return the power indicator, indicating the battery power inside the product;When you press the button for the first time, the maximum gas volume of the third gear will be set by default. The 3 LED lights of the product will be on for 1 second, and then off, and the electricity will be displayed again.Press the button for the second time, switch to the level 2 medium gas volume, the two LED lights of the product for 1 second, and then off, and then display the electricity;Press the button for the third time, switch to level 1 low grade gas volume, one LED of the product is on for 1 second, and then out, and then display the electricity quantity;Press the button for the fourth time, turn off the fan, and the LED will go out for 2 seconds; Then the LED will display the power indicator again for about 8 seconds, and then go out again;If the VR host is connected within 8 seconds, the battery will continue to display; If the fan is off and the VR host is not connected, the LED display will be off after about 8 seconds.

Cooling fan has two built in 800mAh batteries that act as a small emergency charger, providing emergency charging when the battery runs out and extending the VR life by 30 minutes. Charging and endurance operatio: After the VR host is turned on, this product connects to the TYPE C interface of the VR host through the charging cable, which can automatically charge the VR host for about 30 minutes

First

Remove the quest2 original facial interface

Thrid

Press the facial interface against the four buckles of the VR headset

Second

Install the top soft strap.if needed

Fourth

Finally, insert the fan into the facial interface

Note：

1This product is only used for VR headset display devices.If the charging indicator or fan does not work properly, check whether the charging cable is properly connected or whether the battery is fully charged.The built in battery of this product is used to charge VR devices.In order to ensure the normal operation of the product, please use the special charging cable, case and other accessories matched with the product; Please secure the product when using.Please do not store or use the product in a humid or high temperature environment.Do not knock, break, pierce, or try to decompose the product to avoid unnecessary damage to the product;If you do not use the product for a long time, disconnect the power supply of the product.If the product is exposed to rain and water. Or damaged, please stop using, timely sent to the professional maintenance department repair. Do not disassemble by yourself.
Package Dimensions ‏ : ‎ 20 x 14 x 10 cm; 286 g
Date First Available ‏ : ‎ 16 Mar. 2023
Manufacturer ‏ : ‎ Asixxsix
ASIN ‏ : ‎ B0BYP3PPJY
Item model number ‏ : ‎ Asixxsixk781s5idna
Country of origin ‏ : ‎ China
Guaranteed software updates until ‏ : ‎ unknown
Delivery information:: We cannot deliver certain products outside mainland UK ( Details). We will only be able to confirm if this product can be delivered to your chosen address when you enter your delivery address at checkout.

【COOLING FAN SYSTEM, PREVENT FOGGING】VR fan sucks the heat outside to accelerate gas circulation so get your face cooler and less sweat, and stop the lens and glasses from fogging, provides you with better gaming immersion and need not take off the headset frequently like before.
【3 SPEEDS & HIGH-POWER BATTERY】VR cooling fan for Oculus with 3 speed for different types of game modes. And the fan has 2 built in 800mah batteries that can last from 3‑8 hours, and takes only one hour to fully charge. Also act as a small emergency charger, providing emergency charging when the battery runs out and extending the VR life by 30 minutes.
【EASY INSTALL】 To install the facial cover, just ensure the upper and lower 4 buckles are firmly attached to the headset and it snaps the headset very securely, tightly, and does not budge. And The cooling fan for Quest 2 is lightweight, no obvious weight gain after wearing, and does not squeeze the forehead.
【SOFT LIGHT-PROOF NOSE PAD】With silicone nose pads to prevent light from entering the headset, providing you with a better view, and ultra lightweight cooling fan can reduce the burden on your head. It is a perfect gift for man and woman who like to play with Quest 2 on special days or holidays, such as birthdays, Christmas, dates, engagement parties, etc.
【QUALITY GUARANTEED】We always strive to provide our customers with the best service and products. Please feel free to contact our professional after-sale service if you have any questions, we will give you the most satisfactory reply as soon as possible! Thanks for your understanding.